How to Connect Multiple Computers to One Broadband Internet Connection
January 26, 2012 | 
Author Broadband, or high-speed, Internet connection is what many users currently use in their home. Along with high-speed Internet, many users may also use a router to allow multiple computers to connect to the Internet. This post will describe how a router is used to connect multiple computers. To make it easier to understand, I will use where you live as a comparison to how your computer is connected to the Internet.
What is an IP Address?
IP addresses are a series of numbers in the form: nnn.nnn.nnn.nnn, where nnn is a one to three digit number. An IP address is unique to an individual computer on a network, similar to how your home has a unique address. For an Internet connection, an IP address is supplied by your Internet Service Provider (ISP). In some cases, your ISP may provide you with more than one IP address, which allows you to connect multiple computers. As you will see later, however, you can still connect multiple computers with a single IP address.
Connecting a Single Computer
Connecting a single computer to your high-speed Internet is very simple to do. Simply connect a network cable into your modem, and then into the network card in your computer. Your computer will then be assigned an IP address from your ISP. For example, if your ISP assigned you the IP address of 24.24.50.17, then your computer will have that IP address.
When you make a request to a server, such as for a Web page, the Web server knows which IP address made the request. The information is then sent through the Internet and back to your computer. This is similar to when someone sends you mail to your home. The address on the mail allows it to be delivered to your home and not somewhere else.
Connecting Multiple Computers
How can multiple computers connect if only one address is assigned? When you make a request for a Web page, how does it know which computer requested that page? Let’s take our home analogy one step further. Let’s say instead of living in a house, you live in an apartment. When someone sends you mail, they not only include your address but also an apartment number. This number is internal to your apartment building and every apartment has its own unique number. Similarly, multiple computers can connect to the Internet if they each had there own unique local IP address. This can be handled by a router.
A router is a piece of hardware that connects directly to the modem. Each computer is then connected to the router, instead of the modem. Now instead of your computer having the IP address supplied by your ISP, your router now is assigned that IP address. This is similar to your router acting as the apartment building.
The beauty of a router is that it can assign its own local IP addresses. When you connect a computer to the router it now receives one of the IP addresses assigned by your router, similar to how each apartment has it’s own number. Now when you make a request for a Web page, the request is sent using the same ISP address, but this time it is assigned to the router. When the Web page is returned, the router receives the request, and sends it locally to the computer that requested the page.
The router also has its own local address that is similar to the local IP addresses of the computers. So now the router has two addresses assigned to it: an external one provided by your ISP, and a local one provided by it. This allows the router to connect to both the Internet and the local network.
Note: The 192.168.xxx.xxx address are special IP addresses reserved for Local Area Networks (LANs).
Managing a FTP or Web Server on Your Network
Let’s take a look at this scenario. You have a router connecting multiple computers to the Internet. But now you want to create a FTP or Web server. No problem. You setup the necessary software on a computer on your network, told someone outside your network the local IP address of your FTP server and they try to connect. They then discover that they can’t connect. Why? Its similar to someone mailing something to you by just specifying your apartment number and no address.
The IP address assigned to your computer is local to your network. You can connect to that computer from within your network, but not from the Internet. You will need to use your ISP-assigned IP address (the one assigned to your router) to have someone from the Internet connect to your FTP server. The problem is that your router is assigned that IP and not your computer, and since an IP address must be unique, how can two computers have the same IP? The answer: they can’t, but they don’t need to.
Routers have the ability to forward information on a port to a specific computer. A port is a numbered channel that data can be sent through on a network. You cannot physically see it as it is a virtual channel used extensively in networking for sending/receiving data. For FTP servers the default port is 21; however another port can be used.
Open your router setup and look for the port forwarding option. Specify the internal IP address of your FTP server and the port number and then save that information. Now when a user tries to access your FTP site, they must use the ISP IP address that is assigned to your router. The router will then notice that the data is being sent on port 21 and then forward it automatically to your FTP server. A Web server can be setup the same way, but its default port is usually 80.
Note: By default a router will dynamically assign IP addresses to the computers connected to it. This means that the first computer to connect to the router will get the first available IP address, and the next will get the second, and so on. If you manage an FTP server, it may be easier to assign a static IP address to the computers to ensure that the FTP server always has the same IP address.
This article described how to connect one or more computers to one Internet connection. It is important to remember the following:
If you have one computer connected directly to the modem, then that computer will be assigned the IP address from your ISP.
When using a router, the the router will be assigned the IP address from your ISP. Any computers connected to the router will be assigned a local address by the router.
A router will have the ISP IP address and a local IP address. This allows it to connect to both the Internet and your network.
When setting up a computer as a FTP, Web, or other server to communicate over the Internet, it is important to use the router’s IP address to access your server. You will then need to forward the necessary port to your server.
For more information, please read the Technically Easy blog.
Posted in Running Boards Articles | 
Tags: Broadband, Computers, Connect, Connection, Internet, Multiple | 
No Comments »
How to Start Your Own Tattoo Business
When starting any business, it’s important to gain any required training and/or education. When starting a tattoo business in particular, there may be certain training, certification and other requirements that must be met prior to opening a studio. Because of the nature of business, you will need to know how to properly sterilize the equipment and educate customers on how to care for their new tattoo in order to prevent infection. The best way to learn about local license and/or industry requirements is to call the local business office and explain the type of business that you would like to open.
Once your training and any necessary licensing are both successfully completed, it will be time to apply for a business license. This piece of paper is very important and must be displayed in your tattoo studio each and every day. The best way to do this is to place your business certificate in a frame and display it on the wall.
Now that you have a business license and any other special licenses required by your local business department, it’s time to choose a location for your studio. Ideally, any place of business would be located in a high-traffic commercial area. The more people that pass by your business, the better likelihood that they will stop in. In addition, when you advertise your business or try and explain to someone where it is located, you don’t want to have a lot of difficult directions. Instead, a simple ‘in town’ or ‘on main street’ would be ideal.
When it comes to advertising your new tattoo business, start small and work your way up. Because your business is new, you are probably working with a limited budget. Don’t worry, most new businesses are. That’s why there are alternate forms of advertising that can help you to get the word out about your new venture without spending a fortune. First and foremost, purchase a large sign to display outside of your business. Make sure that your business name, grand opening date and any special price offerings are noted for every passerby to see. In addition, decorate any windows in your store with samples of your work recreated as clear window adhesives.
Rather than starting out with a large print advertising budget, try writing a press release and distributing it to local newspapers, magazines and/or radio stations. Place flyers throughout town as permitted and on the bulletin boards of local stores. If you can afford it, offer a tattoo giveaway and special grand opening prices during your first week of operation. You may also want to consider contacting local radio stations with your plan to host a tattoo giveaway. This approach requires that you allow the radio station to award the winner on air, which will result in even more publicity for your new business when the DJ mentions the contest sponsor.
As a final thought to starting your own tattoo business, make sure that you explain the importance of proper tattoo care to your customers. Creating a reference sheet will help to keep your customers informed and will remind them of how often to change the bandage and how to avoid infections.
Police Interview Questions – Know What Will Be Asked During Your Police Oral Board Interview
When you enter the interview room for your law enforcement oral review board interview, there is sure to be some serious anxiety going on inside you. This is normal and it’s expected by your oral board panel. However, it will also be expected that at some point during your oral board interview, that you are able to get control of this anxiety and be able to comunicate with the oral board panel in a clear and convincing manner that demonstrates you have the knowledge and ability to become a successful police officer.
One of the best ways to reduce this anxiety is to be fully prepared for your police interview. The best preparation comes when you know what is expected of you. When you know wha is expected of you, you won’t be caught off guard. One way of doing this is to get a list of the most commonly asked oral board questions. Once you have such a list, your best bet is to practice answering these questions over and over. This will build your confidence…and this confidence is one of the key ingredients to a successful police oral board interview.
The purpose of this article is to give you a “jump start” on making your list of the most commonly asked police oral board questions. That being said, I’m going to now give you what I consider to be the most commonly asked police interview questions, and that is:
“What have you done to prepare for a career in law enforcement?”
So, what have you done?
As an experienced police oral board rater, I can tell you that the best answer to this question is usually the longest answer. That is to say, the more “good” stuff you can tell the oral interview panel, the better. They will want to hear that you took college level criminal justice courses, that you spoke to recruiters, that you went on police “ride-alongs,” and that you attended police prep course given by the local police department.”
The oral board will also like to hear that you understand the importance of being physically fit and that you are running and working out regularly. Perhaps you can relate your prior work experience to that of police work. This is usally easy to do if you were in the military (because you understand paramilitary organizational structure) or even if you were a waiter at a local restaurant (because you have extensive people interaction).
This is usually one of the first questions asked during the law enforcement interview process and being fully prepared to answer this question with good, solid relevant information is sure to set the tone for the rest of the interview.
Prepare yourself, have confidence and best of luck to you!
License Plate Search – How to Trace License Plate Numbers Online
Do you have a license plate or license tag number and you need to find out the name and address of the owner of the vehicle? If so, you might have already realized that there is no free online database of license plate numbers.
Don’t worry. There is still hope. If you need to conduct a reverse license plate number search online, below are several methods to accomplish your goal.
The first method is to hire a private investigator. Find your local phone book and turn to the private investigation pages. Start calling and get prices for how much they charge to run a license plate trace. You can expect to pay $150 to $300 to get this service completed in your local area.
The next method is to use a large online private investigation service like Abika.com or BestPeopleSearch.com. These services will charge you $79 or more to search by license plate number. You will normally get back a combination of the following information: the first and last Name, address, registration and expiration date, make and model of vehicle, VIN number, title number, lien holder name. These services can normally get information for most states in the United States as Canadian Provinces. License plate data for additional countries are also available depending on the service.
The third option is to join a private investigation tools membership service where you have access to databases and resources used by private investigators. These memberships normally start at $29 to $59 per year and give you access to all sorts of people search databases used by private investigators. This is a good choice if you’re willing to do the work yourself and you want to save a little money. The downside to this option is there is no guarantee that you will be successful in your search.As you can see from the options above, there is no such thing as a free reverse license plate search. About the only way you can get it done for free is if you know a law enforcement officer who will conduct the search for you (they have access to all of the databases).
General Rules About Track and Field
The track and field event known as athletics is a combination of many sports such as running, jumping, and throwing. Each track and field game has its own rules set by IAAF and the contestants and even the organizers have to follow them strictly. The general rules about track and field states that each contestant is allowed to participate in three events including relays. In running event, the runner is allowed one false start and is disqualified second time. Well, the different games have different rules and as a participant and host nation you need to follow them according to IAAF rules.
The general rules about track and field from organizer point of view state that the stadium must be well equipped with spectator seating arrangements. The track surface provided to contestants must be covered with all weather material such as asphalt or a rubber compound and the inner circle must be covered with plenty of grass. The track must be divided into at least 8 lanes. The timing and measurements are vital in track and field. In some close events, the difference of fraction of a second can decide the winner. Hence, as an official you must ensure and use latest equipments to avoid confusion. Various advanced software have been introduced for perfect accuracy.
The first thing you need to do as a participant is to confirm your identity regarding age, sex, country, etc. Also, you need to wear a uniform that is designed by your country. The spiked shoes you are using must be tested and if possible, you can wear a number pinned uniform. This allows your fans and officials to identify you. In any situation, you have no right to argue with the judge or officials. Their decision will be the final word.
In track and field game, the lane discipline is important. You are not allowed to run off track and you may get disqualified for running off-track. In relay racing, the baton must be passed within the 20-m long exchange zone or else your team will be disqualified. In hurdling events you will not be qualified if you go around the hurdle and purposely knock down one hurdle. The general rules about track and field clearly states that you need to run over the hurdle. In the past, many professional athletes were disqualified for breaking this rule.
In high jump and pole vault, your ability to clear a bar at various heights is crucial. The bar for pole vault is at higher height than in high jump. The new rule allows you to use fiberglass poles instead of bamboo or metal. In both games, you are allowed three fouls and will be disqualified if you are unable to clear bar on third attempt. The general rules about track and field event such as long jump and triple jump states that you are not allowed to jump the farthest horizontal distance by stepping beyond or ahead of take-off board. The same rule applies to discus throw, hammer throw, and javelin throws. Whereas in shot put, the rule states that you need to throw the metal ball with single hand without stepping out of marked circle.
Well, these are the general rules about track and field events. The best way to follow these rules is to practice hard in your training sessions. A foul means you are out of tournament and who knows you may have missed one prestigious medal for your country!
Meat Thermometer Student Loan Consolidation Rates Security Surveillance
The History Of Industrial Engineering
The Accreditation Board for Engineering and Technology defines industrial engineering as: the profession in which a knowledge of the mathematical and natural sciences gained by study, experience and practice is applied with judgment to develop ways to utilize economically, the materials and forces of nature for the benefit of mankind concerned with the design, improvement and installation of integrated systems of people, materials, equipment and energy. It draws upon specialized knowledge and skill in the mathematical, physical and social sciences together with the principles and methods of engineering analysis and design to specify, predict and evaluate the results to be obtained from such systems.
History
The origins of industrial engineering can be traced back to many different sources. Fredrick Winslow Taylor is most often considered as the father of industrial engineering even though all his ideas where not original. Some of the preceding influences may have been Adam Smith, Thomas Malthus, David Ricardo and John Stuart Mill. All of their works provided classical liberal explanations for the successes and limitations of the Industrial Revolution.
Another major contributor to the field was Charles W. Babbage. a mathematics professor. One of his major contributions to the field was his book On the Economy of Machinery and Manufacturers in 1832. In this book he discusses many different topics dealing with manufacturing, a few of which will be extremely familiar to an IE. Babbage discusses the idea of the learning curve, the division of task and how learning is affected, and the effect of learning on the generation of waste.
In the late nineteenth century more developments where being made that would lead to the formalization of industrial engineering. Henry R. Towne stressed the economic aspect of an engineer’s job. Towne belonged to the American Society of Mechanical Engineers (ASME) as did many other early American pioneers in this new field. The IE handbook says the, “ASME was the breeding ground for industrial engineering. Towne along with Fredrick A. Halsey worked on developing and presenting wage incentive plans to the ASME. It was out of these meetings that the Halsey plan of wage payment developed. The purpose was to increase the productivity of workers without negatively affecting the cost of production. The plan suggested that some of the gains be shared with the employees.. This is one early example of one profit sharing plan.
Henry L. Gantt belonged to the ASME and presented papers to the ASME on topics such as cost, selection of workers, training, good incentive plans, and scheduling of work. He is the originator of the Gantt chart, currently the most popular chart used in scheduling of work.
hat would Industrial Engineering be without mentioning Fredrick Winslow Taylor. Taylor is probably the best known of the pioneers in industrial engineering. His work, like others, covered topics such as the organization of work by management, worker selection, training, and additional compensation for those individuals that could meet the standard as developed by the company through his methods.
The Gilbreths are accredited with the development of time and motion studies. Frank Bunker Gilbreth and his wife Dr. Lillian M. Gilbreth worked on understanding fatigue, skill development, motion studies, as well as time studies. Lillian Gilbreth had a Ph.D. in psychology which helped in understanding the many people issues. One of the most significant things the Gilbrethss did was to classify the basic human motions into seventeen types, some effective and some non-effective. They labeled the table of classification therbligs. Effective therbligs are useful in accomplishing work and non-effective therbligs are not. Gilbreth concluded that the time to complete an effective therblig can be shortened but will be very hard to eliminate. On the other hand non-effective therbligs should be completely eliminated if possible.
In 1948, the American Institute for Industrial Engineers (AIIE), was opened for the first time and began to give a professional authenticity for the practicing engineers. Up to this time industrial engineers really had no specific place in the hierarchy of a company. The ASME was the only other society that required its members to have an engineering degree prior to the development of the AIIE.
What is the future for Industrial Engineers? With analytical methods and the advancing technologies for the computer, modeling complex production and service systems will become more and more an every day task.
Performing a motion study. Every job can be broken down into its’ fundamental work elements. The Gilbreth family found that there are seventeen of these motions. The time to complete each motion does not change. Jobs can be studied visually or through the assistance of a camera for micro-motion studies.
The environment for the workers also needs to be set up to promote efficiency of work. Tools should be placed in fixed locations to eliminate the search and selection therbligs. Work surfaces and chairs should be adjusted to the correct working heights to eliminate stress. Whenever possible, gravity feeders should be used to deliver parts to the correct location. The worker’s tools should be designed to eliminate multiple cuts. Adjustment handles should be designed to maximize the operator’s mechanical advantage.
Performing a time study. Without a standard the company will find it hard to estimate lead-time on their products. Times very greatly when the employee does not know what the expectation of company is. In order to correct this problem the IE will develop a fair standard expectation for each operation. It has been estimated that 12% of a company’s total cost comes from direct labor. Another 43% of cost comes from the material cost. The other 45% is spent in overhead. So the idea that the largest productivity gains can be felt on the floor does not hold up in this light. A good time study will take into account the unavoidable delays, fatigue, and to an extent, outside interferences. Time for wasteful steps, such as searching for tools, will not be included in the final standard. The expectation is that the workplace will be designed to accommodate the work and will be free from this type of waste.
Set-Up Times Set up time is the amount of time it takes to begin producing different parts on a machine. If set-up times remain large the company will operate with high levels of work in progress and finished goods tying up the companies valuable capital. Companies that fail to reduce their set-up times have a tendency to look sluggish in regards to their customers.
Cost An IE will generally be responsible for coming up with a cost analysis on the equipment purchase. There are a several ways of coming up with this. Lifehow long the machine is expected to last when developing the cost analysis.
Efficiency The traditional way of looking at efficiency was to keep the machine running at a 100% The idea was the cost of the machine could be spread out over the amount of time it was kept running. The higher the machines efficiency, time running / time available, the better the accounting numbers looked in regards to machine cost.
Material The IE is concerned with the delivery and flow of material throughout the plant, often the plant has evolved as the company has.
Lot size To allow the manufacturer to stay flexible the production lot sizes should be minimalized. This will only be economical after the reduction of machine set-ups have been achieved.
Inventory Levels Since inventory is capital that cannot be converted until finished and purchased by a consumer, it should be kept to a minimal. Inventories not only tie up capital but if the customer requests a change then the inventory runs the risk of becoming obsolete.
Quality The quality of the material can affect all parts of the system. Poor quality material often introduces excessive amounts of rework into each of the processes. A typical job for an IE would be to work with the quality department to set up a Quality Management system QMS.
Maintenance The amount of maintenance that the machine is going to require is a variable that must be considered. Another issue about maintenance is whether or not the staff on hand will need to be retrained.
How to Lose 10 Pounds in 2 Weeks
Many people ask me how to lose 10 pounds in 2 weeks and is it even possible? The answer is that it’s very possible and that there are several ways in which you can do this. You can either reduce your calorie intake, raise the level of your exercise routines, or do a combination of both. You need to be careful to choose a weight loss process which will make it easy for you to maintain this impressive weight loss for a long time.
1. You can spend 2 weeks in intensive aerobic and strength exercise. This will require you to spend more than an hour each day working out. I don’t mean taking a stroll. I mean intensive cardio routines such as running, rowing, cycling, swimming, or hiking. The more intense the better. Be aware that if you’re not physically fit you may injure yourself by suddenly taking on a large dose of exercise. Choose a reliable fitness plan which will instruct you on how to not go over board.
2. You can use a detox based diet which will cleanse your body and get it to drop a lot of weight fast. But be aware that this will be mostly liquid weight, so that it may not last for a long time.
3. You can use a weight loss plan which is based on Calorie Shifting. This is a weight loss method in which you manipulate your metabolism to remain running high and burning fat at a rapid pace. This is done by constantly changing what you eat so that your metabolism is fooled to believe that you’re not even dieting. The primary Calorie Shifting diet, Fat Loss 4 Idiots, can get you to lose 9 pounds in 11 days.
You should remember that losing 10 pounds in 2 weeks requires a firm commitment on your part. You should also know that you’ll need to work hard to keep the weight off in the future. Choose a diet plan which is reasonable, doesn’t starve you, and is easy to stick to for a long time.
How To Install Truck Running Boards
If you are a pick up truck or SUV owner, one of the most popular accessories for these types of vehicles are running boards. Running boards are particularly useful as they allow easier access to your truck’s cabin in addition to simply “lookin’ good”. You can outfit your vehicle yourself with running boards by following three simple steps. Depending on the brand of running board you purchase, the procedures involved may vary somewhat.
Lund running boards are industry hot sellers and the company helps make installation a breeze by outlining how to get the job done:
1. Insert the square head bolts into the extruded channels on the underside of the board, then attach the Multi-Fit brackets loosely with supplied washers and nuts.
2. After determining mounting position on the truck, the end caps and step pads are attached with matching black rivets.
3. Mounting methods vary slightly with application. Multi-Fit Running boards are bolted in place with clip nuts and bolts at factory holes. Tighten after determining alignment is correct.
That’s it! Before you know it your running boards are securely in place and ready for use.
When shopping for running boards, please note that the quality of the products marketed can vary. A top of the line running board such as those sold by Lund or Westin running boards is typically made out of tough polymer materials or diamond plated aluminum and will, therefore, adequately hold your weight and resist deterioration. You can order running boards that light up, choose boards that have a wide step area, and even select running boards that allow you to paint the shell yourself.
Running boards are made for SUVs from the Kia Sorento to the Ford Expedition, and for trucks from the Toyota Tacoma to the GMC Sierra Denali. Mounting kits are usually sold separately, so before completing your order make sure that all the parts as well as instructions are included with your shipment.
By shopping with a reputable online retailer and installing the running boards yourself you can save plenty of money and have the satisfaction of knowing that you did the installation.
Scrap Accountability in Manufacturing
With the cost of raw materials apparently not going down any time soon, scrap reduction has never been more important for manufacturers. To ensure the maximum use of materials, precision laser-cutting and water-jet machines have been developed. Computerized metal stamping can bring out parts and pieces to the very edge of the stock. In manufacturing, materials management has been made better because both machining technology and management through cost accounting have been improved. In short, accountability is in place on the shop floor and in the front office, and this means that tracking scrap is part of the production process. Of course, the relationship between shop floor and front office has always been one made through data, and it is through data that the root causes of scrap and the methods for its reduction are found.
In short, scrap rate (or yield quality) is a function of production standards and the cost of quality itself: process settings, raw material lots, maintenance activity, operator focus, and so forth. Better working processes and more cost effectiveness in materials management, especially in the creation of scrap, can enhance a manufacturer’s competitive edge. And, competitiveness today is measured in terms of on-time delivery and yield qualities that meet or surpass customer requirements. In the not-too-distant past, just about any level of scrap was considered the necessary result of the manufacturing process; the quantity of scrap was not the issue it would become later when competition arose in the supply chain for diminishing raw material stocks. With the introduction of lean manufacturing and mandates for the reduction of scrap waste through continuous improvement, enterprise resource planning software (ERP) has been developed to strengthen the data-flow between the shop floor and the front office.
To get a good start on scrap accountability, three things must happen. First, you must identify when loss is happening. Only in marking the moments when material loss occurs can you ever see a trend in motion. The identification of loss is both a factor of good inventory management, and an awareness of historical production output. With a good-established-historical baseline in place, material loss trends can be much more easily measured and acted upon as quickly as possible.
Second, a proper method of recording production data is necessary for employees to reveal material use efficiencies. In other words, employees have to have a way, and a requirement, to input good output versus bad product production numbers. Defect issues and other material waste are production data that are not often or easily volunteered. However, when material use is accounted for through a series of reporting mandates, particularly in the easy to use formats of some ERP software systems, there is a greater likelihood of scrap/waste data being collected for later analysis. For example, barcoding and the use of graphical interface terminals around the shop floor provide convenience to workers in being able to input scrap data. In addition, the best reporting techniques will employ a variety of scrap codes and code grouping levels to facilitate analysis.
Finally, a robust, routine, and continuous analysis of scrap data is required in order to bring about both improvements in quality and a subsequent reduction in wasted material. This is truly where a quality ERP software system can be of great benefit. Assuming there is proper recording of scrap data at the shop floor level, management should be able to analyze the information in order to monitor material use and ascertain scrap trends. An ERP software system that collects real-time data from all areas of production facilitates scrap analysis in the most useful and rapid way possible.
To add that extra amount of profitability to a manufacturing operation, look at when, where, and how materials are being used. It is in the increasingly important area of scrap analysis where manufacturers are finding more profit located in the margins. That is to say, by reducing material costs a manufacturer becomes more aware of the use of material in production, and in turn more aware of any disruptions in the material flow patterns and the quality of output.
Advantages of a Smart Board For Teachers & Students
Teachers should carefully make use of all the resources used along with the interactive whiteboards to the fullest. Institutes should make sure that they train the teachers in the right way so that the use of the boards is made effectively. For example it is suggested that text should not be used too much while using the boards else it won’t be different from running a simple projector. To avoid confusion and make the lessons simpler it is advisable to use a small set of text.
The biggest advantage of an IWB is the ability to create presentations using variety of colours and fonts. Highlighting some important text or using some content related backgrounds, adding videos, drawings, images make the lessons livelier and presentable. These additions keep students more engaged than having uneven text or font on a traditional chalk used blackboards.
Collecting the data and putting it altogether in a presentation is not the end teacher’s job. Teachers should always so a prior test on the white boards to confirm is everything is right. The font size, the examples used in the presentation to explain the students, and many other things. It is important that the entire classroom understands the subject and the text is readable. The IWB is a teaching resource to help both the students and teachers however they both should always keep in mind the main objective and goals before getting too much addicted towards the technology.
If the smart boards are used in the correct way then they can be a great gift for both the teachers’ and students.
Posted in Running Boards Articles | Tags: Advantages, Fountains, Students, Teachers, Tuscany | No Comments »